Research requires flexibility – the SmartWasher™ 96 provides it. Full plates, partial plates, and strips with U, V, C, or flat bottoms are accepted by this fully automated washer. Multiple aspiration point settings allow for minimal residual liquid in the wells after aspiration. All parameters, including dispense volume, suction time, soak and shake cycles, and shaking speed are easily programmed using the large 4.3” LCD display and keypad. Up to 100 wash protocols can be stored on board the SmartWasher™ 96 and recalled when needed, or transferred between machines with a flash drive.
The washer comes equipped with 2 wash bottles, 1 rinse bottle and a waste bottle. All have sensors that alert the user when the solutions are low, or in the case of the waste bottle, when it needs to be emptied. An auto-rinse function primes the dispensing tube and wash heads to prevent cross contamination and clogs.
8- and 12-channel manifolds (purchased separately) accommodate plates in either orientation. A transparent, acrylic shield surrounds the wash area, allowing for visualization of the plate. Should a spill or leak occur, the beveled spill well ensures that the liquid is extracted immediately to avoid cross-contamination.
The SmartWasher™ 96 is the perfect partner for the SmartReader™ 96 Microplate Absorbance Reader as well as other popular readers.

Features:
Wash Heads: 8 channel or 12 channel
Wash Modes: 1 point, 2 point, or 3 point aspiration
Compatible Microplates: 96 wells, standard SBS dimensions
Residual Liquid Volume: ≤ 1ul (each well)
Dispensing Volume Range: 50ul – 2000 ul
Wash Cycles: 1 ~ 99 cycles
Program Storage Capacity: 100 programs
Rinse Function Time Range: 00:00 ~ 03:59 (mm : ss)
Soak and Shaking Time Range: 00:00 ~ 99:00 (mm : ss)
Wash Bottle Level Warning: Yes, sensors included in wash and rinse bottles
Wash Solution Channels: 3 bottles
Waste Bottle Level Warning: Yes; sensors detect when waste bottle is full
Waste Aspiration: Yes